S15/T15 Jimmy 2WD V6-4.3L VIN W (1998)
1. Pitman arm on the pitman shaft. Line up the marks made at removal.
2. Pitman arm washer and nut.
-
Tighten pitman arm nut to 250 Nm (185 ft. lbs.).
3. Relay rod ball stud to the pitman arm. Make sure the seal is on the stud.
-
Tighten J 29193 or J 29194 to 62 Nm (48 ft. lbs.) to seat the tapers.
-
Remove the tool.
4. New relay rod prevailing torque nut to the pitman arm.
-
Tighten nut to 82 Nm (60 ft. lbs.).
5. Lower the vehicle.