S15/T15 Jimmy 2WD V6-4.3L VIN W (1998)
Wheel Bearing: Service and Repair
FRONT WHEEL BEARINGS AND/OR HUB
REMOVAL PROCEDURE
^
Tools Required:
-
J 24319BTie Rod End Puller
-
J 36607 Ball Joint Separator
1. Raise the vehicle. Support the vehicle with safety stands.
2. Unload the torsion bar.
3. Remove the tire and the wheel.
4. Remove the drive axle nut.
5. Insert a drift or a large screwdriver through the brake caliper and into the rotor vanes. This prevents the rotor from turning.
6. Remove the washer.
NOTICE: Support the caliper with a piece of wire to prevent damage to the brake line.
7. Remove the brake caliper.