S15/T15 Jimmy 2WD V6-4.3L VIN W (1998)
Fluid Pressure Sensor/Switch: Specifications
Transmission Fluid Pressure Manual Valve
Position Switch To Valve Body Bolt ........................................................................................................................................ 8.0-14.0 Nm (6-10 ft. lbs.)
Control Valve Body Bolts (in sequence) .......................................................................................................................................... 11 Nm (97 inch lbs.)
NOTE: Tighten the control valve body bolts in a spiral pattern starting from the center, as indicated by the arrows.
IMPORTANT: Certain bolts MUST be tightened in a spiral pattern as indicated by the arrows. If these bolts are tightened at random, the valve
bores may become distorted. This will inhibit valve operation.
TCC solenoid bolts ............................................................................................................................................................................ 11 Nm (97 inch lbs.)