S15/T15 Jimmy 2WD V6-4.3L VIN W (1998)
11. Install the shock absorbers to the anchor plates.
12. Install the washers and the nuts.
-
Tighten the nuts to 84 Nm (62 ft. lbs.).
13. Install the axle vibration dampener.
14. Install the rear rotors, if equipped.
15. Install the drums, if equipped.
16. Install the rear wheels. Refer to Wheel Installation in Wheels and Tires.
17. Add lubricant to the axle housing to a level within 9.5 mm (3/8 inch) of the filler plug hole.
