S15/T15 Jimmy 2WD V6-4.3L VIN W (1998)
Differential Cover: Service and Repair
REMOVAL PROCEDURE
1. Raise and suitably support the vehicle.
2. Clean all dirt from the axle housing cover area.
3. Remove the cover bolts. Place a container under the axle housing in order to retrieve the lubricant.
4. Remove the cover from the axle housing. Pry the cover loose.
5. Drain the lubricant from the axle housing.
6. Remove the fill plug.
7. Clean the gasket surfaces on the axle housing and the carrier cover.
INSTALLATION PROCEDURE
1. Install the new gasket.
2. Install the cover.