S15/T15 Jimmy 2WD V6-4.3L VIN W (1998)
TORQUE CONVERTER CLUTCH PWM SOLENOID VALVE
IMPORTANT: Torque Converter Clutch (TCC) PWM solenoid valve resistance should be 10-11 ohms when measured at 20°C (68°F), and 13-15
ohms when measured at 100°C (212°F).
The torque converter clutch PWM solenoid valve controls the fluid acting on the converter clutch valve, which then controls the TCC apply and
release. This solenoid is attached to the control valve body assembly within the transmission. The TCC PWM solenoid valve provides smooth
engagement of the torque converter clutch by operating on a negative duty cycle a variable percent of ON time.
If a fault is detected in the TCC PWM circuit, code P1860 will set.
