S15/T15 Jimmy 2WD V6-4.3L VIN W (1998)
Power Window Motor: Service and Repair
Window Regulator
Removal Procedure
1. Remove the window.
2. Disconnect the electrical connector, it equipped.
3. Drill out the rivets that secure the window regulator to the door.
4. Remove the window regulator from the door.
5. Remove the power window motor, it equipped.
Installation Procedure
1. Install the power window motor, if equipped.
2. Install the window regulator to the door.
3. Install the rivets that secure the window regulator to the door.
4. Connect the electrical connector, if equipped.
5. Install the window.
