gmc Workshop Repair Guides

GMC Workshop Service and Repair Manuals

Key-In Warning Buzzer|Page 12217 > < Diagram Information and Instructions|Page 12214
Page 1
background image

Audible Warning Device: Description and Operation
Key-In Warning Buzzer

Voltage is supplied at all times to the Seat Belt & Ignition Key & Lamps Alarm through the STOP HAZ Fuse 1 and the ORN (140) wire. With the key in
the Ignition Switch and the Ignition Switch in ACC, Lock, or Off, the chime or buzzer will sound if the left door is open.

With the door open, the LH Front Side Door Jamb Switch closes to ground. This provides a ground to the Seat Belt & Ignition Key & Lamps Alarm
through the TAN (159) wire, the Ignition Key Alarm Switch, and the LT GRN (80) wire. The chime or buzzer will sound as long as the door is open or
the key is in the Ignition Switch.

Key-In Warning Buzzer|Page 12217 > < Diagram Information and Instructions|Page 12214