S15/T15 Jimmy 4WD V6-4.3L VIN W (1996)
13. Tie rod end (125) from the knuckle (117) using J 24319-01 (fig. 48).
14. Cotter pins (130).
15. Ball joints (115 and 127) from the knuckle (117) using J 36607 (fig 49).
Note: Locate J 36607 on the ball joint and back off the nut (129, 131) until the ball stud is forced out of the knuckle.
16. Nuts (129 and 131).
17. Knuckle (117) from the ball joints.
18. Spacer (128) from the knuckle (117).
19. Seal (126) from the knuckle (117).
Install or Connect
1. New seal (126) to the knuckle (117) using J 28574 (fig. 50).
2. Spacer (128) to the knuckle (117).