gmc Workshop Repair Guides

GMC Workshop Service and Repair Manuals

Control Module Replacement|Page 2545 > < Control Module Replacement
Page 2
background image

1. Turn ignition ON.
2. Enter diagnostics.

A. Diagnostic Trouble Code (DTC) 12 should flash four times (if no other DTC[s] are present). This indicates the PROM (MEM-CAL) is

installed properly, and the PCM is functioning.

B. If DTC 51 occurs, or if the MIL is "ON" constantly with no DTC(s), the PROM (MEM-CAL) is not fully seated or is defective.

^

If not fully seated, press firmly on the ends of the PROM (MEM-CAL).

^

If it is necessary to remove the PROM (MEM-CAL), follow the previous removal instructions.

NOTE:  To prevent possible Electrostatic Discharge damage to the PROM (MEM-CAL), Do Not touch the component leads, and Do Not remove
integrated circuit from carrier.

Control Module Replacement|Page 2545 > < Control Module Replacement