S15/T15 Sonoma P/U 2WD L4-2.2L VIN 4 (1995)
Brake Light Switch: Service and Repair
Below LH Side Of I/P - Clutch And Brake Pedal Bracket Areas
All Except Utility Truck Brake Switch
1. Disconnect battery ground cable.
2. Disconnect wiring connector from brake light switch located on brake pedal bracket.
3. Disconnect retainer from brake pedal pin.
4. Disconnect switch by unsnapping from pushrod.
5. Reverse procedure to install.
Fig. 4 Stop Light Switch
