S15/T15 Sonoma P/U 2WD L4-2.2L VIN 4 (1995)
^ Mark the relationship of the intermediate shaft.
1. Intermediate shaft.
^
Raise the vehicle. Support the vehicle with jack stands.
2. 0il filter pipes at crossmember bracket.
3. Splash shield.
4. Relay rod nut from the pitman arm ball stud. Do not reuse the nut.
5. Relay rod from the pitman arm ball stud using J 24319-01.
6. Power steering gear.
^
Mark the pitman arm and the pitman shaft. This will permit proper alignment at assembly.
NOTICE: Do not hammer on pitman arm, pitman shaft, or puller. Damage to pitman arm or steering gear may result.
7. Pitman arm from pitman shaft of steering gear. Use J 6632-01 or J 29107.
INSPECT
^
Ball stud threads for damage.
^
Ball stud seals for excessive wear.
CLEAN
^
Threads on the ball stud.
Steering Linkage (4 Wheel Drive)
INSTALL OR CONNECT
TOOLS REQUIRED:
^
J 29193 Steering Linkage Installer (12 mm)
1. Pitman arm on to pitman shaft of steering gear. Line up the marks made at removal.
2. Pitman arm washer and nut.
