S15/T15 Sonoma P/U 2WD L4-2.2L VIN 4 (1995)
Band Apply Servo: Service and Repair
1. Raise and support vehicle.
2. Remove two oil pan bolts from below servo cover.
3. Install servo cover compressor tool No. J-29714 or equivalent on oil pan flange and depress servo cover.
4. Remove servo cover retaining ring.
5. Remove servo cover and seal ring.
6. Remove servo piston and bore-apply pin assembly.
7. Reverse procedure to install. Whenever any servo parts are replaced, apply-pin length must be checked.
