S15/T15 Sonoma P/U 2WD L4-2.2L VIN 5 Flex Fuel (2001)
Speaker: Service and Repair
Speaker Replacement - Front
REMOVAL PROCEDURE
1. Remove the front speaker grille screws.
2. Remove the radio front speaker grille.
3. Remove the DRL sensor from the right speaker grille (if equipped).
4. Turn the DRL sensor counterclockwise 1/4 turn in order to remove.
5. Remove the radio front speaker screws.
6. Remove the radio front speaker.
7. Disconnect the electrical connector.
INSTALLATION PROCEDURE
1. Connect the electrical connector.
2. Install the radio front speaker.
NOTE: Refer to Fastener Notice in Service Precautions.
3. Install the radio front speaker screws.
Tighten
Tighten the radio front speaker screws to 1.9 N.m (17 lb in).
4. Install the DRL sensor to the right speaker grille (if equipped).
5. Turn the DRL sensor counterclockwise 1/4 turn in order to install.