S15/T15 Sonoma P/U 2WD L4-2.2L VIN 5 Flex Fuel (2001)
Speaker: Service and Repair
Speaker Replacement - Rear
REMOVAL PROCEDURE
1. Remove the rear body side trim panel.
2. Disconnect the electrical connectors.
3. Remove the radio rear speaker nuts.
4. Remove the rear speaker from the rear body side trim panel.
INSTALLATION PROCEDURE
1. Install the radio rear speaker to the rear body side trim panel.
NOTE: Refer to Fastener Notice in Service Precautions.
2. Install the radio rear speaker nuts.
Tighten
Tighten the radio rear speaker nuts to 1.2 N.m (11 lb in).
3. Connect the electrical connectors.
4. Install the rear body side trim panel.
5. Inspect for proper circuit operation.