S15/T15 Sonoma P/U 2WD L4-2.2L VIN 5 Flex Fuel (2001)
Front Door Hinge: Service and Repair
Hinge Roller Pin Replacement - Door
TOOLS REQUIRED
J 36604 Door Hinge Spring Compressor
REMOVAL PROCEDURE
CAUTION: Before removing the spring, cover the spring with a towel to prevent the spring from flying and possibly causing damage or
personal injury.
1. Remove the door hinge spring using the J 36604.
2. Remove the C-clips that retain the door hinge roller pins.
3. Support the door in the open position.
4. Remove the door hinge roller pins from the vehicle.
Use a soft-faced hammer and locking pliers in order to remove the hinge pins.
5. Position the door away from the hinge. Remove and discard the old bushings.
INSTALLATION PROCEDURE
