S15/T15 Sonoma P/U 2WD L4-2.2L VIN 5 Flex Fuel (2001)
Front Door Window Regulator: Service and Repair
Front Side Door Window Regulator Replacement
Tools Required
J 34940 Rivet Gun
Removal Procedure
1. Remove the window.
2. Disconnect the power window motor electrical connector, if equipped.
3. Remove the electrical harness retainers, if equipped.
4. Drill out the rivets that secure the window regulator to the door.
5. Remove the window regulator from the door.
6. Remove the power window motor, if equipped.
Installation Procedure
1. Install the power window motor, if equipped.
2. Install the window regulator to the door.
3. Install the rivets that secure the window regulator to the door using J 34940.
4. Connect the electrical connector, if equipped.
5. Connect the electrical harness retainers, if equipped.
6. Install the window.
