S15/T15 Sonoma P/U 2WD L4-2.2L VIN 5 Flex Fuel (2001)
Hood Latch: Service and Repair
Hood Secondary Latch Replacement
Hood Secondary Latch Replacement
Removal Procedure
1. Raise and support the hood.
2. Remove the bolts that retain the latch assembly to the hood.
3. Remove the secondary hood latch assembly from the hood.
Installation Procedure
1. Install the secondary hood latch assembly to the hood.
Notice: Refer to Fastener Notice in Service Precautions.
2. Install the secondary hood latch bolts that retain the latch assembly to the hood.
Tighten the secondary hood latch mounting bolts to 25 N.m (18 lb ft).
