S15/T15 Sonoma P/U 2WD L4-2.2L VIN 5 Flex Fuel (2001)
License Plate Bracket: Service and Repair
Front License Plate Bracket Replacement
Removal Procedure
1. Remove the grille.
2. Drill out the rivets that retain the bracket to the front air deflector.
3. Remove the bracket from the front air deflector.
Installation Procedure
1. Drill 4 new holes in the air deflector using a drill jig if a new air deflector has been installed.
2. Install the bracket to the front air deflector with 4 rivets.
3. Install the grille.