S15/T15 Sonoma P/U 2WD L4-2.2L VIN 5 Flex Fuel (2001)
Cross-Member: Service and Repair
Transmission Support Replacement (RWD)
Removal Procedure
1. Raise and suitably support the vehicle. Refer to Vehicle Lifting.
2. Install the transmission jack to the transmission and support the transmission.
3. Disconnect the transmission wiring harness from the transmission support, if necessary.
4. Remove the transmission mount to the transmission support stud nut, 2.2 L.
5. Remove the transmission mount to the transmission support stud nut, 4.3 L pickup and utilities.
6. Remove the catalytic converter hanger bracket from the transmission support mounting bolts, 2.2 L if necessary.