S15/T15 Sonoma P/U 2WD L4-2.2L VIN 5 Flex Fuel (2001)
Caution: In order to avoid personal injury or vehicle damage when you repair or replace the carpet, use the same thickness and material
size as the original installation. Always return the carpet to the original location.
1. Install the carpet or the mat to the vehicle.
2. Install the body hinge trim panels.
3. For vehicles with the extended cab with rear side door, install the C-pillar trim panel.
4. Install the body side trim panels.
5. Install the floor console or cup holder, if equipped.
*
Front Floor Console Replacement (Full Length (Auto Trans)) Front Floor Console Replacement (Full Length (Envoy)) Front Floor Console
Replacement (Non-Full Length) Front Floor Console Replacement (Full Length (Manual Trans))
*
Front Floor Console Cup Holder Replacement
6. Install the door sill trim plates.
7. Install the jack to the vehicle.
8. Install the jack cover to the vehicle.
9. Install the front seats.
Front Floor Mat/Carpet Replacement (Pickup)
Front Floor Mat/Carpet Replacement (Pickup)
Removal Procedure
1. Remove the front seat.
2. Remove the jack cover from the vehicle.
3. Remove the jack from the vehicle.
4. Remove the door sill trim plates.
5. Remove the floor console or cup holder, if equipped.
6. Remove the body side trim panels.
7. Remove the body hinge trim panels.
8. Remove the carpet or mat from the vehicle.
Installation Procedure
Caution: In order to avoid personal injury or vehicle damage when you repair or replace the carpet, use the same thickness and material
size as the original installation. Always return the carpet to the original location.
