S15/T15 Sonoma P/U 2WD L4-2.2L VIN 5 Flex Fuel (2001)
8. Remove the screws that retain the front of the console to the vehicle.
9. Remove the console from the vehicle.
INSTALLATION PROCEDURE
1. Install the console to the vehicle.
NOTE: Refer to Fastener Notice in Service Precautions.
2. Install the screws that retain the front of the console.
Tighten
Tighten the screws to 7 N.m (63 lb in).
3. Install the cup holder insert.
4. Install the nuts that retain the rear of the console.
Tighten
Tighten the nuts to 10 N.m (89 lb in).
5. Install the transmission select switch (if equipped).
