S15/T15 Sonoma P/U 2WD L4-2.2L VIN 5 Flex Fuel (2001)
Tighten the nuts to 10 N.m (89 lb in).
5. Install the transmission select switch (if equipped).
6. Install the console compartment insert.
7. Install the console compartment insert screws.
Tighten the nuts to 1.9 N.m (17 lb in).
8. Install the shift handle to the shift lever.
9. Install the shift handle retaining clip at the front of the handle.
Front Floor Console Replacement (Full Length (Envoy)
Front Floor Console Replacement (Full Length (Envoy))
Removal Procedure
1. Remove the front ashtray from console by gently prying out the ashtray with a flat-bladed tool.
2. Carefully lift up on the wood shifter assembly close-out in order to remove the assembly from the console. The closeout panel will need to be
rotated to fit over the shift handle.
