gmc Workshop Repair Guides

GMC Workshop Service and Repair Manuals

Console Lamp Replacement|Page 9703 > < Console Lamp Replacement|Page 9701
Page 27
background image

Front Floor Console Replacement (Non-Full Length)

Front Floor Console Replacement (Non-Full Length)

Removal Procedure

1. Remove the shift control lever (manual transmission only).
2. Remove the console from the floor.

Pull up on the console in order to release the retainer clips.

Installation Procedure

1. Use care when installing the console so the clips do not bend.
2. install the console to the floor.
3. Install the shift lever (manual transmission only).

Roof Console Replacement (Full Length)

Roof Console Replacement (Full Length)

Removal Procedure

1. Remove the overhead lamp lens on the overhead console.

2. Remove the 3 overhead console roof screws. One screw is located towards the front of the console and the other 2 are located behind the dome

lamp lens.

3. Disconnect the electrical connectors.
4. Remove the console.

Installation Procedure

Console Lamp Replacement|Page 9703 > < Console Lamp Replacement|Page 9701