S15/T15 Sonoma P/U 2WD L4-2.2L VIN 5 Flex Fuel (2001)
Trim Panel: Service and Repair
Body Side Trim Panel Replacement (Extended Cab Pickup)
Body Side Trim Panel Replacement (Extended Cab Pickup)
Removal Procedure
1. Remove the upper and the lower seat belt anchor bolts.
2. Remove the coat hook.
3. Remove the door sill trim plate.
4. Remove the screws that retain the body side trim panel to the vehicle.
5. Disconnect the electrical connectors, as needed.
6. Remove the shoulder belt opening trim cover.
7. Feed the seat belt through the trim cover.
8. Remove the body side trim panel from the vehicle.
Installation Procedure
1. Feed the seat belt through the trim panel.
2. Install the shoulder belt opening trim cover.
3. Connect the electrical connectors, as needed.
4. Install the body side trim panel to the vehicle.
Notice: Refer to Fastener Notice in Service Precautions.