S15/T15 Sonoma P/U 2WD L4-2.2L VIN 5 Flex Fuel (2001)
12. Remove the cable (3) from the bracket (1) by loosening cable nut (2).
13. Remove cable (3).
Installation Procedure
1. Install the cable (3) through the hole (2) in the seat adjuster rail.
2. Hook the cable (3) into the rail and clip the cable to the rail (1).
3. Install the seat adjuster rail to the seat frame with 2 nuts (1).
Tighten bolts to 24 N.m(18 lb ft)
4. Install the cable (3) to the seat back pivot assembly.
5. Install the cable (3) to the pivot assembly bracket by tightening cable nut (2).
6. Install the cable cover bracket (2) to the seat back pivot assembly.
7. Install the two bolts (1).
