S15/T15 Sonoma P/U 2WD L4-2.2L VIN 5 Flex Fuel (2001)
Important: When separating the seat cover hook and loop retaining strips, do not pull the adhesive-backed strip from the pad.
6. Release the lower hook and loop retaining strips (2) located inside the seat cover (1).
7. Remove the cover (1) from the rear seat back assembly.
8. Carefully remove the seat back pad (3) from the rear seat back frame.
Installation Procedure
1. Position the seat back pad (3) to the rear seat back frame.
2. Install the cover (1) to the rear seat back assembly.
3. Pull the seat cover down over the seat back pad.
4. Press the seat cover hook and loop retaining strips (2) together by firmly running your hand over the seat back cover.
