S15/T15 Sonoma P/U 2WD L4-2.2L VIN 5 Flex Fuel (2001)
Tailgate Shock / Support: Service and Repair
Endgate Cable Replacement (Pickup)
Endgate Cable Replacement (Pickup)
Removal Procedure
1. Safely support the endgate in the open position.
2. Remove the bolts that retain the endgate supports to the endgate.
3. Remove the endgate supports from the vehicle.
Installation Procedure
1. Install the endgate supports to the vehicle.
Notice: Refer to Fastener Notice in Service Precautions.
2. Install the bolts that retain the endgate supports to the vehicle.
Tighten the bolts to 2.8 N.m (25 lb in).
3. Install the bolts that retain the endgate supports to the endgate.
Tighten the bolts to 2.8 N.m (25 lb in).
