S15/T15 Sonoma P/U 2WD L4-2.2L VIN 5 Flex Fuel (2001)
Trunk / Liftgate Weatherstrip: Service and Repair
Endgate Weatherstrip Replacement
Endgate Weatherstrip Replacement
Removal Procedure
In order to remove the liftgate window weatherstrip from the pinch-weld flange, perform the following steps:
1. Open the liftgate window.
2. Firmly grip the weatherstrip.
3. Pull the weatherstrip.
Installation Procedure
1. Open the liftgate window.
2. Push the weatherstrip onto the pinch-weld flange.
Begin with the pre-formed corner at either upper corner of the liftgate window opening.
3. Completely seat the weather-strip around the liftgate window opening.