S15/T15 Sonoma P/U 2WD L4-2.2L VIN 5 Flex Fuel (2001)
1. If you are reinstalling the original sensor, or installing a new sensor without a sealer, coat the threads with sealer P/N 9985253 or an equivalent.
NOTE: Refer to Fastener Notice in Service Precautions.
2. Install the ECT sensor.
Tighten
Tighten the sensor to 20 N.m (15 lb ft).
3. Install the electrical connector.
4. Install the air cleaner outlet resonator.
5. Refill the lost coolant. Refer to Draining and Filling Cooling System in Cooling System.
