S15/T15 Sonoma P/U 2WD L4-2.2L VIN 5 Flex Fuel (2001)
11. Remove the water pump gasket.
12. Clean the water pump mating surfaces.
Installation Procedure
1. Install the water pump gasket to the engine.
2. Install the water pump to the engine.
3. Apply a sealer (GM P/N 12346004) to the bolt threads.
Notice: Refer to Fastener Notice in Service Precautions.
4. Install the water pump mounting bolts.
^
Tighten the water pump mounting bolts to 55 Nm (18 ft. lbs.).