S15/T15 Sonoma P/U 2WD L4-2.2L VIN 5 Flex Fuel (2001)
Rocker Arm Assembly: Service and Repair
Valve Rocker Arm and Push Rod Replacement
Removal Procedure
1. Remove the valve rocker arm cover.
Important: Be sure that valve train components are kept together and identified so that they can be installed in their original location.
2. Remove the rocker arm assemblies.
3. Remove the pushrods.
4. Clean and inspect all parts.
Installation Procedure
Important: When you install new rocker arms, lubricate the pivot bearing valve tips, and push rod sockets of the rocker arms with engine assembly
prelube GM P/N 1052367.
