S15/T15 Sonoma P/U 2WD L4-2.2L VIN 5 Flex Fuel (2001)
9. Remove the fuel injector harness electrical connector from the bracket on the valve rocker arm cover.
10. Remove the engine wiring harness from the bracket.
11. Move and secure the engine wiring harness out of the way.
12. Remove the engine wiring harness bracket at the rear of the engine using the following procedure:
12.1.
Loosen the bolt at the rear of the cylinder head.
12.2.
Remove the two bolts that secure the bracket to the valve rocker arm cover.
12.3.
Slide the bracket off of the bolt at the rear of the cylinder head.
13. Remove the air cleaner outlet resonator bracket.
Important: The valve rocker arm cover gasket is reusable. Only replace the valve rocker arm cover gasket if it is damaged.
14. Remove the rocker arm cover bolts, stud (1) and bracket (2).
15. Remove the rocker arm cover.
