S15/T15 Sonoma P/U 2WD L4-2.2L VIN 5 Flex Fuel (2001)
8. Install the bolt holding the positive battery cable to the engine.
^
Tighten the bolt to 35 Nm (26 ft. lbs.).
9. Install the starter.
10. Install the left side transmission support brace and bolts.
^
Tighten the bolts to 50 Nm (37 ft. lbs.).
11. Lower the vehicle.
12. Connect the negative battery cable.
Right
Engine Mount Replacement - Right
Removal Procedure
Notice: Broken engine mountings can cause misalignment of certain drive-train components. Misalignment of drive-train components causes eventual
destruction of the drive-train components.
If one engine mount breaks, the rest of the engine mounts will have increased stress put on them. This could cause the rest of the engine mounts to
break.
