S15/T15 Sonoma P/U 2WD L4-2.2L VIN 5 Flex Fuel (2001)
2. Install the engine mount through-bolt.
^
Tighten the engine mount through-bolt to 45 Nm (33 ft. lbs.).
3. Remove the engine lifting device.
4. Raise the vehicle.
5. Working through the wheelhouse, install the generator rear brace.
6. Install the nuts holding the brace to the intake stud and the stud on the engine.
7. Install the bolt holding the brace to the rear of the generator.
^
Tighten the generator rear brace nuts and bolt to 55 Nm (18 ft. lbs.).
8. Install the transmission support brace.
^
Tighten the transmission support bolts to 50 Nm (37 ft. lbs.).