S15/T15 Sonoma P/U 2WD L4-2.2L VIN 5 Flex Fuel (2001)
Intake Manifold: Service and Repair
Intake Manifold Replacement
Removal Procedure
1. Disconnect the negative battery cable.
2. Remove the upper fan shroud.
3. Disconnect the power brake booster vacuum hose.
4. Remove the air cleaner outlet resonator.
5. Disconnect the following electrical connectors:
^
Idle Air Control (IAC) motor (1)
^
Manifold Absolute Pressure (MAP) sensor (4)
^
Throttle Position (TP) sensor (2)
6. Disconnect the fuel injector harness electrical connector.
