S15/T15 Sonoma P/U 2WD L4-2.2L VIN 5 Flex Fuel (2001)
7. Remove the fuel injector harness electrical connector from the bracket on the valve rocker arm cover.
8. Remove the engine wiring harness from the bracket.
9. Move and secure the engine wiring harness out of the way.
10. Disconnect the heating and air conditioning control vacuum source hose.
11. Disconnect the EVAP emission purge tube from the throttle body.
12. Remove the bolt holding the EVAP emission canister purge harness and if equipped the transmission fluid fill tube.
13. Remove the nut holding the engine wiring harness clip to the intake manifold.
14. Remove the nut holding the engine wiring harness clip to the intake manifold rear lower stud.
15. Disconnect the fuel hose from the fuel rail.
16. Remove the accelerator control cable from the throttle body.
17. Remove the cruise control cable from the throttle body.
18. Remove the spark plug wires from the spark plugs.
19. Remove the spark plug wire harness retainer from the thermostat assembly and set aside the spark plug wire harness.
