S15/T15 Sonoma P/U 2WD L4-2.2L VIN 5 Flex Fuel (2001)
20. Remove the right fender wheelhouse extension.
21. Working through the wheelhouse, remove the generator rear brace from the engine.
^
Remove the nuts holding the brace to the intake stud and the engine block.
^
Remove the bolt holding the brace to the rear of the generator.
22. Remove the engine wiring harness bracket at the back of the engine using the following procedure:
22.1.
Loosen the bolt at the rear of the cylinder head.
22.2.
Remove the two bolts that secure the bracket to the valve rocker arm cover.
22.3.
Slide the bracket off of the bolt at the rear of the cylinder head.
