S15/T15 Sonoma P/U 2WD L4-2.2L VIN 5 Flex Fuel (2001)
Timing Cover: Service and Repair
Engine Front Cover Replacement
^
Tools Required
-
J 35468 Oil Seal Installer
Removal Procedure
1. Remove the crankshaft pulley and hub.
2. Remove the drive belt tensioner.
3. Remove the engine front cover bolts.
4. Remove the engine front cover and gasket.
Important: Inspect the engine front cover for warping or damage. Replace if needed.
5. Clean all sealing surfaces.
Installation Procedure
