gmc Workshop Repair Guides

GMC Workshop Service and Repair Manuals

Automatic Control|Page 7985 > < Automatic Control|Page 7983
Page 5
background image

1. Remove the knee bolster.
2. Remove the right side driver knee bolster bracket (2) from the steering column bracket (1) and the intermediate bracket (3).

3. Disconnect the vacuum connectors (1) from the mode actuator (5).
4. Remove the actuator rod retaining clip (4).
5. Remove the actuator rod (2) from the mode door lever (3).

Automatic Control|Page 7985 > < Automatic Control|Page 7983