S15/T15 Sonoma P/U 2WD L4-2.2L VIN 5 Flex Fuel (2001)
6. Remove the heater outlet hose bracket bolt.
7. Remove the outlet heater hose from the vehicle.
INSTALLATION PROCEDURE
1. Apply lubricant (GM P/N 9985662) to each end of the outlet heater hose.
IMPORTANT: When installing new outlet heater hose, place the clamp on the hose before installing the hose to the vehicle.
2. Install the outlet heater hose to the vehicle.
NOTE: Refer to Fastener Notice in Service Precautions.
3. Install the heater outlet hose bracket bolt.
Tighten
Tighten the bolt to 25 N.m (18 lb ft).
