gmc Workshop Repair Guides

GMC Workshop Service and Repair Manuals

A/C Refrigerant Filter Installation|Page 8279 > < A/C Refrigerant Filter Installation|Page 8277
Page 1
background image

Refrigerant Filter: Service and Repair
A/C Refrigerant Filter Replacement

TOOLS REQUIRED

J 39400-A Halogen Leak Detector

REMOVAL PROCEDURE

1. Recover the refrigerant from the system. Refer to Refrigerant Recovery and Recharging.
2. Remove the PCM.
3. Remove the engine coolant reservoir. Refer to Coolant Recovery Reservoir Replacement in Cooling System.

IMPORTANT:  The nuts (4) and ferrules (3) will remain on the evaporator tube. Do not try to remove.

4. Remove the nuts (4) from the A/C refrigerant filter (1).
5. Remove the A/C refrigerant filter (1) from the evaporator tube.

INSTALLATION PROCEDURE

1. Coat the new O-rings (2) with 525 viscosity refrigerant oil.
2. Install the new O-rings (2) to the evaporator tube.
3. Install the A/C refrigerant filter (1) to the evaporator tube with the flow arrow pointing towards the evaporator.

NOTE:  Refer to Fastener Notice in Service Precautions.

A/C Refrigerant Filter Installation|Page 8279 > < A/C Refrigerant Filter Installation|Page 8277