gmc Workshop Repair Guides

GMC Workshop Service and Repair Manuals

Malfunction Indicator Lamp > < Disabling|Page 10500
Page 2
background image

6. Install the connector position assurance (CPA) to the driver yellow 2-way connector located at the base of the steering column.
7. Install the knee bolster, if equipped.
8. Install the sound insulator-LH.
9. Install the SIR Fuse to the IP fuse block.

10. Staying well away from both air bags, turn the ignition switch to the RUN position.

10.1.

The AIR BAG warning lamp will flash 7 times.

10.2.

The AIR BAG warning lamp will then turn OFF.

11. Perform the SIR Diagnostic System Check if the AIR BAG warning lamp does not operate as described.  See: Restraint Systems/Air Bag

Systems/Testing and Inspection/Initial Inspection and Diagnostic Overview/Diagnostic System Check

Malfunction Indicator Lamp > < Disabling|Page 10500