S15/T15 Sonoma P/U 2WD L4-2.2L VIN 5 Flex Fuel (2001)
Parking Brake Warning Switch: Service and Repair
Park Brake Warning Lamp Switch Replacement
Removal Procedure
1. Remove the left hinge pillar trim.
2. Remove the electrical connector.
3. Remove the park brake warning lamp switch mounting bolt.
4. Remove the park brake warning lamp switch from the vehicle.
Installation Procedure
Notice: Refer to Fastener Notice in Service Precautions.
1. Install the park brake warning lamp switch.
-
Tighten the park brake warning lamp switch mounting bolt to 4 Nm (35 inch lbs.).
2. Install the electrical connector.
3. Install the left hinge pillar trim panel.
