S15/T15 Sonoma P/U 2WD L4-2.2L VIN 5 Flex Fuel (2001)
Cargo Lamp: Service and Repair
CARGO LAMP REPLACEMENT
REMOVAL PROCEDURE
CAUTION: Refer to Battery Disconnect Caution in Service Precautions.
1. Disconnect the battery negative cable.
2. Remove the rear window garnish molding.
3. Disconnect the electrical connector.
4. Remove the cargo lamp assembly from the roof rear header garnish molding by prying out the assembly using a flat-bladed tool.
INSTALLATION PROCEDURE
1. Install the dome lamp assembly to the roof rear header garnish molding by pressing the assembly into position.
2. Connect the electrical connector.
3. Install the rear window garnish molding.
4. Connect the battery negative cable.