S15/T15 Sonoma P/U 2WD L4-2.2L VIN 5 Flex Fuel (2001)
7. Remove the body wiring harness from the ballast.
8. Remove the ballast and ballast subplate fastener from the support bracket.
9. Remove the ballast and ballast subplate from the ballast support bracket.
10. Remove the ballast subplate fasteners from the ballast.
11. Remove the ballast from the ballast subplate.
INSTALLATION PROCEDURE
IMPORTANT: Ensure that the ballast subplate is oriented with the ring on the starter cable side of the ballast.
1. Install the ballast to the ballast subplate.
NOTE: Refer to Fastener Notice in Service Precautions.
2. Install the ballast subplate fasteners to the ballast.
Tighten
Tighten the ballast subplate fasteners to 5 N.m (45 lb in).