S15/T15 Sonoma P/U 2WD L4-2.2L VIN 5 Flex Fuel (2001)
Door Switch: Service and Repair
Door Jamb Switch Replacement - Front
REMOVAL PROCEDURE
CAUTION: Refer to Battery Disconnect Caution in Service Precautions.
1. Disconnect the battery negative cable.
2. Remove the instrument panel sound insulator (right side only).
3. Remove the instrument panel sound insulator (left side only).
4. Reach up and disconnect the electrical connector.
5. Squeeze the locking tabs in order to remove the door jamb switch from the vehicle.
INSTALLATION PROCEDURE
1. Install the door jamb switch to the vehicle. Fully seat the locking tabs.
2. Connect the electrical connector to the switch.
3. Install the instrument panel sound insulator (right side only).
