S15/T15 Sonoma P/U 2WD L4-2.2L VIN 5 Flex Fuel (2001)
Drive Belt: Service and Repair
Drive Belt Replacement
Removal Procedure
Notice: Allowing the drive belt tensioner to snap into the free position may result in damage to the tensioner.
1. From under the vehicle, install a 3/8 inch drive wrench on the drive belt tensioner arm.
2. Rotate the arm counter clockwise.
3. Remove the drive belt.
4. Slowly release the tension.
Installation Procedure
1. Route the drive belt over all the pulleys except the tensioner arm.
2. Observe drive belt routing for vehicles without air conditioning.