S15/T15 Sonoma P/U 2WD L4-2.2L VIN 5 Flex Fuel (2001)
1. Remove the caps or plugs from the open connections.
2. Install the compressor hose assembly to the evaporator.
3. Install the air intake resonator.
4. Install a new O-ring seal.
Coat the O-ring seal with 525 viscosity refrigerant oil.
NOTE: Refer to Fastener Notice in Service Precautions.
5. Install the compressor hose assembly to the condenser. Refer to Compressor Sealing Washers Replacement.
Tighten
Tighten the hose to 28 N.m (21 lb ft).
6. Install a new O-ring seal.
Coat the O-ring with 525 viscosity refrigerant oil.
