S15/T15 Sonoma P/U 2WD L4-2.2L VIN 5 Flex Fuel (2001)
1. Install a new O-ring seal.
Coat the O-ring seal with 525 viscosity refrigerant oil.
NOTE: Refer to Fastener Notice in Service Precautions.
2. Install the evaporator tube to the condenser.
Tighten
Tighten the evaporator tube to 28 N.m (21 lb ft).
3. Install the air intake resonator.
4. Install a new O-ring seal.
Coat the O-ring seal with 525 viscosity refrigerant oil.
5. Install the evaporator tube to the evaporator.
Tighten
Tighten the evaporator tube to 28 N.m (21 lb ft).
6. Install the evaporator tube clip to the accumulator.
7. Install the evaporator tube retaining screw.
Tighten
Tighten the screw to 1.9 N.m (17 lb in).
